TNT Sports

List of contents of this article:

• 1,TNT Sports Does the computer start up and show that the initialization failed?
• 2, 3, Agilent 1290 online display login failure configuration system failed to initialize
< Li style='margin-bottom: 3px;List-style: none'>4, configuration system failed to initialize
• 5, KTV Leishi cashier system, when the application is opened, the system failed to initialize the current fault is not normal...
• 6, What does it mean that the cashier system failed to initialize?

Does the computer start up and show that the initialization failed?

Solution (1). After pressing the power switch on the Windows7/windowsvista system, immediately click the F8 key on the keyboard, and the following interface will appear. If the following interface fails to appear, you can restart the computer for this operation.At this time, select "Safe Mode" with the "↓" key on the keyboard and press "Enter" twice to enter the safe mode.

The failure of computer initialization may be caused by many reasons, some of which include driver problems, hardware problems, software damage or virus infection, etc. There are corresponding solutions to the initialization failure caused by these problems. Check the hardware. First of all, check whether the hardware is connected correctly.

You can try the following methods: check the disk connection: make sure that the disk is properly connected to the computer. If you are using an external hard disk, you can try to replace the cable or port, or connect it to another computer to see if it can be initialized normally.

If the computer initialization process fails, the following situations may occur: Blue screen: During the initialization process, the computer screen may turn blue and some error messages may be displayed.Loop restart: After the initialization fails, the computer may enter a loop restart state and keep trying to restart.

Agilent 1290 online display login failure configuration system failed to initialize

The first type: external line problem, caused by poor line contact, in this case, only fault can be reported. The second type: caused by high temperature. If the temperature of the cat or route is too high and exceeds its temperature limit, it will automatically break. When not in use, turn them off and then put them in a ventilated place.

The reason for the failure of initialization in this situation is the improper installation of the side door, mechanical failure, and failure of the telescopic plate of the sampling unit. Incorrect installation of the side door: Make sure that the side door has been installed correctly. If you find that the side door is not installed, it needs to be installed in time. Mechanical failure: If the equipment has a mechanical failure, it needs to be repaired or replaced in time.

Framework Development architecture, SQL Server database and other support require the installation of the operating environment framework required by the system.It is recommended to reinstall the complete operating system, re-obtain the software installation package and install the program. User.config: refers to the user configuration status of the software, which is the possible cause of the conditions mentioned above.

The configuration system failed to initialize

1, solutionCase (1) After pressing the power switch in the Windows7/windowsvista system, immediately click the F8 key on the keyboard, and the following interface will appear. If the following interface fails to appear, you can restart the computer to do this operation. At this time, select "Safe Mode" with the "↓" key on the keyboard and press "Enter" twice to enter the safe mode.

2. The first type: external line problem, caused by poor line contact, in this case, only fault can be reported. The second type: caused by high temperature. If the temperature of the cat or route is too high and exceeds its temperature limit, it will automatically break. When not in use, turn them off and then put them in a ventilated place.

3. Software problems: The software of the cashier system may have errors, conflicts or damage, resulting in the inability to initialize the system.This may be caused by software update problems, compatibility problems or other technical failures.

KTV Leishi cashier system, when the application opens, the system fails to initialize the current failure is not normal...

Win7 system, open the C/user/administrator/AppData /Local in the directory related to Leishi Delete all clips, including: thunder, thunderSY, thunderZK, thunderMnmber.

Software problems: The software of the cashier system may have errors, conflicts or damage, resulting in the inability to initialize the system.This may be caused by software update problems, compatibility problems or other technical failures.

The application does not check the failure of memory allocation. When the program needs a piece of memory to save data, it needs to call the "functional function" provided by the operating system to apply. If the memory allocation is successful, the function will return the newly opened memory area address to the application, and the application can pass This address uses this piece of memory.

System files are damaged or lost, pirated system or Ghost version system, this problem is easy to occur. The operating system itself has problems, and the operating system itself will also have bugs. Hardware problems, such as broken memory stick or quality problems, or a lot of dust on the gold finger of the memory stick.

What does it mean that the cashier system failed to initialize?

Open the software prompt "The configuration system failed to initialize"? Win7 system, open C/user/administrator/AppData/Local and delete all folders related to thunderstone in the directory, including: thunder, thunderSY, thunderZK, thunder Mnmber.

System files are damaged or lost, pirated system or Ghost version system, this problem is easy to occur. Suggestion: Use the full version or genuine system. If the installed software conflicts with the system or other software, find the conflicting software and uninstall it.

If there is. Third: Broadband connection, restart, restart.Fourth: Does the protocol freely obtain IP? Conclusion: The failure caused by data conflict has been repeated, and all problems have been solved. If it still can't be solved, if there is a signal on the external network, use 360's manual service to restore the system to solve the problem.

The card is not initialized means that the user's card has not been activated; the sleep card means that the card has not been used for a long time after it is activated, resulting in the bank deactivating the card.

Because the corresponding NFC function of the mobile phone is not turned on, resulting in the failure of the task. Just turn on NFC. The NFC function on mobile phones, that is, near-field transmission, is a short-distance high-frequency wireless communication technology that can realize back-to-back data transmission between electronic devices.