DigiPlus Philippine

Engine knocking on DigiPlus Philippinethe cylinder refers to the knocking sound of the engine, at which time the root cause needs to be found, and the problem often occurs in the cylinder block.The engine is a key part of the car. Its working principle is to convert fuel into mechanical energy through the internal combustion engine to drive the vehicle. However, if there is a knocking sound in the engine, it will not only reduce the efficiency of the engine, but also have a lot of negative effects, and may even lead to engine damage. Therefore, it is very important to find and solve the problem of engine cylinder knocking in time. So, what is the reason for the engine to knock on the cylinder? It mainly includes the following points: First, the wear of the parts in the cylinder. Because the accessories inside the cylinder block are constantly rubbing when the engine is working, resulting in increased wear, which may cause damage, erosion or cracks in the cylinder wall, resulting in a knocking sound. Secondly, the quality of fuel is poor. The use of poor-quality fuel or gasoline containing debris and other components will produce precipitation, causing the fuel nozzle to be blocked, affecting the fuel injection effect, and thus causing a knocking sound.Again, the carburetor is damaged. The carburetor is a relatively fragile part. If it is hit or damaged, the parts inside the carburetor will fail, which will affect the normal operation of the engine, resulting in a knocking sound. Another situation is that the car is flooded. If the car is not repaired in time after soaking in water, water vapor will penetrate into the interior of the car, affecting the normal use of the engine and causing a knocking sound. When the engine knocks on the cylinder, it needs to be repaired in time. Here are several common repair methods: First, replace some parts. If it is caused by a fault, it is necessary to replace the faulty parts. For example, if the carburetor is damaged and causes a knocking sound, the carburetor needs to be replaced. Secondly, lubricate the engine. The engine is a large mechanical system, which needs to be lubricated regularly. Adding some lubricants, lubricants, etc. to the engine can effectively reduce friction, thus reducing the knocking sound.Thirdly, carry out cleaning and maintenance. If it is a knocking sound caused by fuel and carburetor, it can be solved by cleaning and maintenance. For example, you can clean the fuel injector and take corresponding adjustment measures to make it work normally. Finally, regular maintenance is the most important. Regularly check the condition of the engine, find faults in time, and carry out timely maintenance. In addition, it is also necessary to follow the standard driving, use the car correctly, do not accelerate excessively, do not overload, and do not overload drive, so as to avoid the occurrence of engine knocking on the cylinder and extend the life of the car. In a word, engine cylinder knocking is an inevitable problem in the use of cars. We should pay more attention to the working status of the engine, avoid unnecessary damage, and maintain our cars regularly, so as to ensure the normal operation of the car, reduce the knocking sound, and extend the service life of the car.

Contact Us
Phone：020-83484611